DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

How to: MTU and MSS in 2820n

  • fundutzi
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Mar 2011 02:54 #66773 by fundutzi
How to: MTU and MSS in 2820n was created by fundutzi
Dear All,

Please can I ask how to set the MTU and MSS for WAN2 (PPPoE) in Drayek 2820n.

The command "wan ppp_mss xxxx" does not work in 2820 it seems.
I did "wan mtu xxxx" and "wan mtu2 xxxx", then do restart.
When I test with Linux ping-s xxxx IP the Draytek changes have no effect.
Must be me??

When making MTU and MSS changes in some other firewalls I own changes are reflected immediately.

Your help will be much appreciated.

Best regards,

Please Log in or Create an account to join the conversation.

More
20 Aug 2013 15:04 #77482 by ollyadmin
Replied by ollyadmin on topic Re: How to: MTU and MSS in 2820n
I have the same issues so it is not you !!!

Please Log in or Create an account to join the conversation.

More
20 Aug 2013 22:30 #77486 by babis3g
Replied by babis3g on topic Re: How to: MTU and MSS in 2820n
There is a similar issue with a 2850 here
http://www.forum.draytek.co.uk/viewtopic.php?f=13&t=18669
My 2830 works fine via telnet and W 7 & W 8, thank God because there is not option via UI ... is not possible to set it manually via the UI? WAN >> Internet Access? sometimes the telnet has bugs with few firmwares

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami