DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Cannot access webpage for new 2820Vn

  • jonesthegas
  • Topic Author
  • Offline
  • New Member
  • New Member
More
31 Dec 2010 15:24 #65422 by jonesthegas
Cannot access webpage for new 2820Vn was created by jonesthegas
I have just installed my new router 2820Vn. I live in the UK. The hardware installation went fine. The LEDs are doing what they ought to do. My OS is Windows 7. I do not know the firmware.

When I type 192.168.1.1 in a browser I cannot connect. I therefore cannot set the thing up. When I ping that address I get no response

What I have tried so far

1) Different cables and ports no help
2) Factory reset
3) My TCP/IP properties are set to obtain auto as needed

Any ideas?

Martin

Please Log in or Create an account to join the conversation.

More
31 Dec 2010 18:02 #65423 by freefall
Replied by freefall on topic Cannot access webpage for new 2820Vn
Hi, have you tried https://...?

Is your PC getting a valid IP address if you check ipconfig?

Nick

Please Log in or Create an account to join the conversation.

More
31 Dec 2010 18:30 #65424 by zobby
Replied by zobby on topic Cannot access webpage for new 2820Vn
might be worth setting your IP address on your PC to the same range - ie 192.168.1.10 for example, with the subnet of 255.255.255.0 and see if you can connect then - DHCP may be set to off on your router for some reason.

Please Log in or Create an account to join the conversation.

  • jonesthegas
  • Topic Author
  • Offline
  • New Member
  • New Member
More
01 Jan 2011 15:04 #65428 by jonesthegas
Replied by jonesthegas on topic Cannot access webpage for new 2820Vn
Thanks that helped

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami