DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Unable to get IP Routing to work (No-NAT)

  • paul_hood
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Dec 2010 20:41 #65311 by paul_hood
Hi All,

I am unable to get IP Routing to work as per this FAQ: http://www.draytek.co.uk/support/kb_vigor_2ndsubnet.html

As soon as "For IP Routing Usage" is set to "Enable" the No-NAT function does not function at all.

Info:
Model Name : Vigor2820n
Firmware Version : 3.3.4.1_232201
Build Date/Time : Sep 8 2010 15:39:30
ADSL Firmware Version : 232201_A Hardware: Annex A

8x IP's from the ISP
First Usable IP: x.x.x.145 (also the nat'ed address for the network this is also the routers address)
Subnet Mask: 255.255.255.248

The device that requires the public IP address is x.x.x.146
so the settings on the device are:
IP: x.x.x.146
Subnet: 255.255.255.248
Gateway: x.x.x.145
DNS: ISP DNS Servers


Any ideas?


Regards,
Paul Hood

Please Log in or Create an account to join the conversation.

More
20 Dec 2010 14:50 #65323 by drewy
Replied by drewy on topic Unable to get IP Routing to work (No-NAT)
are you connecting to the isp via the built in adsl modem? or wan2?

Please Log in or Create an account to join the conversation.

  • paul_hood
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Dec 2010 15:35 #65340 by paul_hood
Replied by paul_hood on topic Unable to get IP Routing to work (No-NAT)
Resolved!

Just make sure the IP addrss is not listed in WAN IP Alias / Join NAT IP Pool.

It just worked as it should after this.


Regards,

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami