DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

firewall Filezilla

  • steveo888
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Dec 2010 12:00 #65305 by steveo888
firewall Filezilla was created by steveo888
Hi, I need some help with setting up my firewall 2820vn firmware 3341, to allow Filezilla out to ftp site, I have Default firewall set to block all,
allow http 80 ->
allow https 443->
allow dns 53->
allow ftp 21->

error log from syslog

[Filter][block][lan->wan,4:24:54:440][@S:R=13:1,192.168.1.16:49461->62:253:162:29:47478][TCP][HLen=20,Tlen=52,...
any one shed some light what I need to do please
Thanks in advance
Steveo

Please Log in or Create an account to join the conversation.

  • steveo888
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Dec 2010 19:07 #65310 by steveo888
Replied by steveo888 on topic Firwall with filezilla
solved! It was the port range, I limited the port range in filezilla settings to 40000-50100 in Active mode, then firewall rule to allow Lan -> Wan port range 40000-50100 and it works ok


Firewall >> Filter Setup
Filter set 7
rule 2
Lan->Wan
Source ip =any
Destination ip= Ftp server
service type tcp, port from any >40000-50100
fragments =dont care
pass if no further match -syslog ticked


hope this helps someone
Steveo

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami