DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

NAT one IP of subnet; Can I do this?

More
23 Nov 2010 10:45 #64988 by r101
Hi,

I'm with A&A and looking at buying a 2920n to go with the BT Infinity modem, and I'm wondering if I can achieve the following?

I've a block of 5 usable IPs and ideally I'd like to have the 2920 route my subnet as per usual, but have one of the IP's be the external address for the NAT i.e.

81.x.x.0 - Network Address
81.x.x.1 - Router WAN IP
81.x.x.2 - NAT - 10.0.0.1 ... 10.0.255 (WiFi in this subnet too)
81.x.x.3 - VOIP Phone
81.x.x.4 - Server
81.x.x.5 - Server
81.x.x.6 - Server
81.x.x.7 - Broadcast IP

It looks like it should be possible from reading the manual using the appropriate 1st/2nd subnet settings in the LAN->General Setup page, but it would be good to know for definite before buying one.

Cheers

Please Log in or Create an account to join the conversation.

More
26 Nov 2010 16:32 #65028 by benji
Replied by benji on topic NAT one IP of subnet; Can I do this?
Not exactly the answer - but I have had various Draytek routers and with multiple IPs they have all NATed by default on the router WAN IP.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami