DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Assigning a static IP address to devices

  • bradley porter
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Nov 2010 20:41 #64939 by bradley porter
Assigning a static IP address to devices was created by bradley porter
Dear all

For VoIP devices, I would like to assign the phone a spare public IP that I have available (assigned already within WAN Aliases) - however, I am unsure on how to do this so the device bypasses all the NAT functions of the 20820. The reason behind this is that VoIP devices run best (apparently) when they have there own IP address assigned to them and bypass any proxy's).

If I want to assign a device a public IP so that it has direct access to the Internet then what is the proper procedure? Do I use the DMZ function and 'map' the public IP to the private address on the phone? Or is there another and more appropriate method to ensure the device is almost 'directly connected' to the internet?

Thanks in advance.

Brad

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
20 Nov 2010 12:03 #64942 by acseuser
Replied by acseuser on topic Assigning a static IP address to devices
Err, go to NAT >> Address Mapping. Select the WAN IP address, then type in the destination private IP address, and leave the netmask (and probably the protocol) alone.. AND don't forget to tick 'enable' ;-)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami