DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2110 with virgin

  • trolleybus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Nov 2010 18:02 #64674 by trolleybus
2110 with virgin was created by trolleybus
This ground must have been covered previously but a search hasn't revealed what I am looking for. Basically I have a virgin broadband service and want to replace the existing router with the 2110.

I have tried various configurations but can't get the router to give me an Internet connection. There is CAT5 from the virgin modem to the WAN socket on the 2110. Using P1 to connect to my desktop with CAT5 - That's
all for the moment.

Is there a set by step guide of how to configure the router appropriately to pickup the virgin service and could some kind sole advised me of what needs to be done. Assistance would be very much appreciated.

David

Please Log in or Create an account to join the conversation.

More
03 Nov 2010 18:44 #64676 by njh
Replied by njh on topic 2110 with virgin
Are you power cycling the CM (cable modem) when you change what it is connected to? If not, you need to.

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

  • trolleybus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Nov 2010 19:06 #64677 by trolleybus
Replied by trolleybus on topic 2110 with virgin

NJH wrote: Are you power cycling the CM (cable modem) when you change what it is connected to? If not, you need to.



Yes indeed.

Please Log in or Create an account to join the conversation.

  • trolleybus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Nov 2010 16:39 #64719 by trolleybus
Replied by trolleybus on topic 2110 with virgin
All sorted with help from Draytek.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami