DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 Staic Route + Port Forwarding

  • limes102
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Oct 2010 21:39 #64463 by limes102
Replied by limes102 on topic 2820 Staic Route + Port Forwarding
I thought about it... and then I thought that although it would probably work, it would be a bit annoying having to look after two sets of port forwardings.... I think I might have to move away from my beloved draytek </3

Please Log in or Create an account to join the conversation.

More
25 Oct 2010 21:45 #64466 by lozstlouis
Replied by lozstlouis on topic 2820 Staic Route + Port Forwarding
Wonder if the config hasn't updated properly... With the Java thing etc. I used a 2820 for something similar not so long ago & it worked. 2800 maybe not.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

  • limes102
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 Oct 2010 21:48 #64467 by limes102
Replied by limes102 on topic 2820 Staic Route + Port Forwarding
When I try to add a port forwarding it tells me off, says it's not a valid IP address... I just altered the HTML to make it add (norty) and i know it says it's an invalid IP, even though it works... it's still somethign that should work ! :)

Please Log in or Create an account to join the conversation.

More
26 Oct 2010 11:22 #64488 by voodle
Replied by voodle on topic 2820 Staic Route + Port Forwarding
Try it through the telnet interface, the validation is only in the web interface - the commands are "srv nat portmap" and "srv nat openport".

Please Log in or Create an account to join the conversation.

More
26 Oct 2010 14:19 #64498 by lozstlouis
Replied by lozstlouis on topic 2820 Staic Route + Port Forwarding
Good call Voodle.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

  • limes102
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 Oct 2010 18:58 #64507 by limes102
Replied by limes102 on topic 2820 Staic Route + Port Forwarding
I tried that also... No luck unfortunately :(

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami