DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Setup of Qos on 2820

More
02 Nov 2010 21:44 #64640 by abrookesuk
Replied by abrookesuk on topic Setup of Qos on 2820
Hi

Went back to 3.3.3 and even did a factory default but this did not help. I will try 3.3.4.1 and see if that makes any difference

Please Log in or Create an account to join the conversation.

  • robathome
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 Nov 2010 09:22 #65039 by robathome
Replied by robathome on topic Setup of Qos on 2820
Did you go to 3.3.4.1?

I am still tinkering with QoS and at last have got some traffic to go through the QoS rules. However I can only get it working one way - outwards from within the network controlled by the 2820.

For example I have set rule 1 for Local IP 192.168.0.200 on TCP port 80.
Now when that PC goes to WWW that does go through rule 1.

I also set a rule for the same IP for TCP port 3389. When I RDP out from that PC the traffic goes through that rule, but not when I RDP into it from outside the network. Is this something to do with pseudo ports maybe?

Getting closer...
Rob

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami