DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120 DS Attainable Rate

  • rapsystems
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Oct 2010 08:53 #64330 by rapsystems
Vigor 120 DS Attainable Rate was created by rapsystems
Does anyone know why the DS Actual Rate is so much lower than the DS Attainable Rate?



ATU-R Info (hw: annex A, f/w: annex A)

DSL Modulation : ADSL2+(G.992.5)
State : SHOWTIME
DS Actual Rate : 4544000 bps US Actual Rate : 1049673 bps
DS Attainable Rate : 9388000 bps US Attainable Rate : 1048000 bps
DS Path Mode : Interleave US Path Mode : Interleave
DS Interleave Depth : 511 US Interleave Depth : 4
NE Current Attenuation : 41 dB Cur SNR Margin : 9 dB
DS actual PSD : 18. 5 dB US actual PSD : 12. 3 dB
ADSL Firmware Version : 332201_A

ATU-C Info

Far Current Attenuation : 19 dB Far SNR Margin : 6 dB
CO ITU Version[0] : 00004946 CO ITU Version[1] : 0000544e
DSLAM CHIPSET VENDOR : < IFTN >

Please Log in or Create an account to join the conversation.

More
21 Oct 2010 10:19 #64334 by nealuk
Replied by nealuk on topic Vigor 120 DS Attainable Rate
Is it because you haven't specified that the Modem should connect with Annex M ? Are you on an enhanced upload line? Who is the ISP? Is it Be There Be Pro ?

On my Be Pro service I found that leaving the modem on "Multimode" it wouldn't choose the better Annex M.

Regards,

Neal.

Please Log in or Create an account to join the conversation.

  • rapsystems
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Oct 2010 10:30 #64336 by rapsystems
Replied by rapsystems on topic Vigor 120 DS Attainable Rate
I'm not on enhanced upload or Annex M. My ISP is AAISP.

Please Log in or Create an account to join the conversation.

More
21 Oct 2010 10:48 #64337 by nealuk
Replied by nealuk on topic Vigor 120 DS Attainable Rate

rapsystems wrote: I'm not on enhanced upload or Annex M. My ISP is AAISP.


Could you confirm that you're running the latest firmware 3.2.4.4 as this did fix an upload issue according to the release note?

Please Log in or Create an account to join the conversation.

  • rapsystems
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 Oct 2010 11:16 #64338 by rapsystems
Replied by rapsystems on topic Vigor 120 DS Attainable Rate
I am running the latest version of firmware. My query is with the download, not upload, actual/attainable rates.

Please Log in or Create an account to join the conversation.

More
21 Oct 2010 12:21 #64340 by howard simpson
Replied by howard simpson on topic Vigor 120 DS Attainable Rate
The discrepancy is probably because you have an unstable line due to interference. Your target SN ratio has been raised from 6 to 9 due to lots of disconnections or router reboots. If you could get a stable line the SNR target would drop to 6 and you would get a higher speed at least thats my undesatnding of how it works.

Howard

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami