DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

NAT Active Sessions

  • bradley porter
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Oct 2010 15:54 #64097 by bradley porter
NAT Active Sessions was created by bradley porter
Dear all,

I noticed that the 'NAT Active Sessions Table' seems to keep NAT sessions alive dispute the device being unplugged for a few minutes.

For example, I had a problem with my VoIP device and looked at the 'NAT Active Sessions Table' to see what was going on. I then unplugged the device and noticed that this did NOT free up the NAT address. I assumed that when the device was unplugged the table would clear out its details.

Am I missing something?

Thank you.

Brad

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
05 Oct 2010 17:03 #64100 by voodle
Replied by voodle on topic NAT Active Sessions
The router has a rather long TCP session time out which won't clear sessions as devices are disconnected, only when they time out.
You can change that through the telnet interface, the command is "portmaptime". If you don't know how to access the router's telnet interface or the commands, there's a telnet guide on the draytek UK downloads page.

Please Log in or Create an account to join the conversation.

  • bradley porter
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Oct 2010 17:12 #64101 by bradley porter
Replied by bradley porter on topic NAT Active Sessions
Thank you for the reply. Much appreciated.

My current settings are as below:


Current setting

TCP Timeout : 86400 sec.
UDP Timeout : 180 sec.
IGMP Timeout : 10 sec.
TCP WWW Timeout: 60 sec.
TCP SYN Timeout: 60 sec.

So it looks like the TCP timeout is set to 24 hours.

Is that not a little excessive?

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
05 Oct 2010 23:14 #64105 by voodle
Replied by voodle on topic NAT Active Sessions
Possibly, but if you're seeing problems with NAT sessions on a VoIP thing, that'll usually be UDP traffic.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami