DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Switching to FTTC

  • jm_paulin
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Sep 2010 10:52 #63862 by jm_paulin
Switching to FTTC was created by jm_paulin
Hi,

I am about to switch to FTTC in the near future (BT Infinity). I know this is VDSL2 and that BT supplies a modem. I was wondering if I can plug the BT modem straight into the WAN2 of the Draytek 2820.

Anyone knows if that works?

Thanks

Jean-Marc

Please Log in or Create an account to join the conversation.

More
20 Sep 2010 12:14 #63865 by j.baker
Replied by j.baker on topic Switching to FTTC
If the supplied modem has an ethernet port and supports PPPoE then it should.

Regards

John Baker


Vigor2820 series with firmware 3.3.5.2_RC2
ADSL

Please Log in or Create an account to join the conversation.

More
22 Sep 2010 11:19 #63918 by ashimmons
Replied by ashimmons on topic Switching to FTTC
Plug in to any ethernet WAN port and set up the connection as PPPoE on the router (username & password requireD). It works well - I'm using this config on a Vigor2910.

Please Log in or Create an account to join the conversation.

More
25 Sep 2010 11:56 #63961 by cbsys
Replied by cbsys on topic Switching to FTTC
Yes the BT infinity router DOES connect to WAN 2 on the 2820 and does PPPoE passthru, just like a v120

We have just set this up on ours, and it works great!

Please Log in or Create an account to join the conversation.

More
11 Oct 2010 15:36 #64194 by layer7
Replied by layer7 on topic Switching to FTTC
I've setup my 2820 to use infinity, all OK. However I can't get the IPSEC VPN to work now. Anyone managed ot do this?

Please Log in or Create an account to join the conversation.

More
11 Oct 2010 15:41 #64196 by ashimmons
Replied by ashimmons on topic Switching to FTTC
I use an IPSec vigor to vigor VPN & it works fine.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami