DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2920n Bind-IP to MAC - Specific SSID

  • dsambrook
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Sep 2010 10:08 #63781 by dsambrook
2920n Bind-IP to MAC - Specific SSID was created by dsambrook
Does anyone know if it's possible to set the bind-ip to MAC feature only to specific SSID's on the 2920n?

For example; bind-ip to MAC for devices on SSID 1 but allow all / any MAC addresses to SSID 2.

Please Log in or Create an account to join the conversation.

More
15 Sep 2010 21:04 #63788 by the pit
Replied by the pit on topic 2920n Bind-IP to MAC - Specific SSID
Can't understand what you're trying to do.

Do you want ssid2 to give out different ip address's. If so the answer is no.

Please Log in or Create an account to join the conversation.

  • dsambrook
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 Sep 2010 09:47 #63793 by dsambrook
Replied by dsambrook on topic 2920n Bind-IP to MAC - Specific SSID
You can have 4 different SSID's on the 2920 so I want to use one of them as a guest SSID.

Unfortunately it doesn't seem possible to have a different DHCP scope for each SSID so every device is on the same subnet, but the firewall restricts access between different SSID's.

What I would like to do is only allow devices with specific MAC addresses to connect to SSID 1 and allow all devices (not restricted by MAC address) on SSID 2 (Guest SSID).

Is that possible?

Please Log in or Create an account to join the conversation.

More
16 Sep 2010 19:17 #63818 by the pit
Replied by the pit on topic 2920n Bind-IP to MAC - Specific SSID
Yes you can set security for each ssid.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami