DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VPN Passthru Vigor 2710n - Cisco Client

More
07 Sep 2010 21:40 #63708 by jayuk
Hi all,

Hoping someone can help?? :)

I have an XP client running Cisco VPN Client 4.6.

This connects to the internet (and ultimately to the remote VPN Cisco Device) through a Vigor 2710n.

The laptop authenticates (and potentially establishes a tunnel) to the remote Cisco VPN Server/Device, but when I try to access anything it just times out. The tunnel is an IPSEC/UDP tunnel.

According to the knowledge base you shouldn;t have to do anything specific?

If I rpelace the Draytek for a bog standard home Netgear ADSL wireless G router, then the client VPN works straight away!

Please help....

J.

Please Log in or Create an account to join the conversation.

More
08 Sep 2010 13:42 #63717 by rj
Hi JayUK,

Please try the following CLI (telnet) command in your Vigor2710n :

srv nat ipsecpass on


Hope this helps. ;-)

regards,

RJ

Please Log in or Create an account to join the conversation.

More
13 Sep 2010 19:46 #63767 by jay_uk
Replied by jay_uk on topic VPN Passthru Vigor 2710n - Cisco Client
RJ,

Spot on!!! :D

Works a treat.

I tried altering the setting through the GUI, but obviously the "back door" method works differently/better!

Many thanks,

J.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami