DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

vigor 120 - how to save ip route

  • pcmanning
  • Topic Author
  • Offline
  • New Member
  • New Member
More
24 Aug 2010 09:33 #63495 by pcmanning
vigor 120 - how to save ip route was created by pcmanning
I've configured my 120 with an additional route so I can access the web page from anywhere on the network (it's on it's own VLAN with a gateway on the router), so via telnet

ip route add 192.168.0.0 255.255.0.0 192.168.2.254 0 static

Which works fine, but on reboot it loses the setting. I've tried both adsl savecfg and sys commit commands but neither saves this setting. Is there any way to preserve this over a reboot?

ta
Paul

Please Log in or Create an account to join the conversation.

More
25 Aug 2010 00:59 #63519 by admin
Replied by admin on topic vigor 120 - how to save ip route
That is not a supported feature, so if it works at all, it's not intentional. It's probably a vestigial bit of code from the Vigor2700e.



Forum Administrator

Please Log in or Create an account to join the conversation.

  • pcmanning
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Aug 2010 08:24 #63524 by pcmanning
Replied by pcmanning on topic vigor 120 - how to save ip route
Oh that's unfortunate. I know it's supposed to be a black box, but I would like to monitor it properly - my broadband connection is unreliable (at the back end of beyond), so would be nice to just check the sync speed remotely without my other workround (a VM with NIC in the same VLAN!)

Guess I'll have to tolerate the issue :(

Paul

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami