DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2820vn + Firmware 3.3.4 + O2 ISP - Not Working

  • rizzir
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Aug 2010 08:49 #63415 by rizzir
Hi All,

Has anyone working 2820VN Router
On Firmware 3.3.4
With O2 ISP / ADSL ?????

My 2820VN Router was on firmware 3.3.0, which i upgarded it to Firmware 3.3.4 and now its not working.

i am using following settings.

2. Click on tab 'MPoA(RFC1483/2684) and enable
3. a. Change Multi-PVC channel to channel 2
b. VPI = 0
c. VCI = 101
d. Modulation = ADSL2+(G.992.5)
e. WAN Connection Detection Mode = Arp Detect
f. Select obtain an IP address Automatically

No Joy at all.

after spending 3 hours lastnight I gave up.
Tonight i will apply firmware 3.3.3, and see if i can get it to work.

Please Log in or Create an account to join the conversation.

More
19 Aug 2010 10:34 #63417 by rothers
Did you upgrade to 3.3.4 with .all or .rst ?

Please Log in or Create an account to join the conversation.

  • rizzir
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 Aug 2010 10:43 #63418 by rizzir

rothers wrote: Did you upgrade to 3.3.4 with .all or .rst ?



Upgraded to.all

Please Log in or Create an account to join the conversation.

More
19 Aug 2010 15:50 #63427 by rothers
.all upgrade with 3.3.4 has been known to result in corrupted firmware.

I'd try applying 3.3.3 .all and if that doesn't work make a note of your settings then apply 3.3.3 .rst

Please Log in or Create an account to join the conversation.

More
03 Sep 2010 10:05 #63651 by dbames
Replied by dbames on topic 3.3.4_rc10
I'm happily running 3.3.4_rc10 on a 20mb O2 LLU line with my 2820Vn. I've not moved up to the final release due to the bugs in DHCP and MAC address binding.

Please Log in or Create an account to join the conversation.

More
14 Dec 2010 13:49 #65246 by thehollster
I have the same problem and have tried all recent firmwares with the .rst and .all. I cannot get BE working. I get ADSL showtime and WAN1 all stays red with no IP, GW IP and all zeros.

My connection was working before I asked BE to change me to AnnexA and fastpath. It was on Annex M. I may have to ask them to switch me back in the meantime.

Help! :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami