DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Can't set 1st LAN IP

More
05 Aug 2010 13:59 #63173 by u6ik
Can't set 1st LAN IP was created by u6ik
Very odd thing happening. I've set up previous Draytek 2820vn routers without trouble, but this one is not letting me set the 1st LAN IP to anything other than it's default setting.

In LAN IP Network Configuration I have DHCP disabled, and I have

1st IP Address: 192.168.0.1
1st Subnet Mask: 255.255.255.0

It also states that the Administrator's IP will be 192.168.1.11 which I can't seem to be able to change and certainly can't access when the router reboots.

Can anyone assist? What's going wrong with this setup?

Please Log in or Create an account to join the conversation.

More
05 Aug 2010 15:28 #63176 by rpg
Replied by rpg on topic Can't set 1st LAN IP
Very odd. If its new and just out of the box would a Factory Settings reboot help?

Which firmware is it on?

Please Log in or Create an account to join the conversation.

More
05 Aug 2010 16:09 #63180 by u6ik
Replied by u6ik on topic Can't set 1st LAN IP
Found the issue. I was running through a Netgear active switch which has the 192.168.0.1 target ip set. Looks like it was clashing.

Doh!

Thanks

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami