DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Network Mask Missing

  • splunkydunky
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Jul 2010 15:28 #62877 by splunkydunky
Network Mask Missing was created by splunkydunky
Help please. I just received a static ip address from BT. In the vigor2820n internet access screen I have set the fixed ip to yes and entered the fixed ip address but there is no field to enter the network mask. Am I doing something wrong? Current Firmware Version: 3.3.3_232201

Regards

Mick

Please Log in or Create an account to join the conversation.

More
15 Jul 2010 17:09 #62881 by voodle
Replied by voodle on topic Network Mask Missing
You only need to set the subnet mask if you're using IP routing (LAN - General Setup - 2nd IP Address), otherwise just enter one fixed IP in the fixed IP setting, then use WAN IP alias to configure the rest.

Please Log in or Create an account to join the conversation.

More
16 Jul 2010 08:28 #62894 by limes102
Replied by limes102 on topic Network Mask Missing
Yep

Also, it might be a fixed IP but it might be assigned dynamically.. So you might not have to set it on your router :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami