DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820n 3.3.4 DHCP bug?

More
02 Jul 2010 13:49 #62646 by mph
Replied by mph on topic 2820n 3.3.4 DHCP bug?
There's definitely a bug in 3.3.4 DHCP. I've got a problem with it not giving out bound IP addresses after a while.

Please Log in or Create an account to join the conversation.

More
02 Jul 2010 23:47 #62661 by anoracknophobia
Replied by anoracknophobia on topic 2820n 3.3.4 DHCP bug?
same here ..since 3.3.4 not giving out IP addresses to devices identified in the the 'bound to mac' list.

Also, 2820 appears to be totally screwed this evening ...
got 3 green LEDs on LHS alght for about 10sceonds, and NO lan link LEDS on the RJ45's
then..
all link LEDS flash on briefly..
then
all nine LEDs on the LHS flash on then off ( twice ?) together
then get ACT and QoS LEDs on briefly...
then the cylce repeats

I cant log into the router to see whats going on .... tried factory reset.. no joy

Please Log in or Create an account to join the conversation.

More
05 Jul 2010 11:15 #62695 by mph
Replied by mph on topic 2820n 3.3.4 DHCP bug?
Support have suggested taking out machines from the bind-to-mac list. Tried this and they immediately got a DHCP address.

Roll on 3.3.5 :roll:

Please Log in or Create an account to join the conversation.

  • benji
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
05 Jul 2010 17:26 #62708 by benji
Replied by benji on topic 2820n 3.3.4 DHCP bug?
Seems to be the only workaround (other than 3.3.3!)

I have noticed the "NAT Active Sessions Table" still had dozens of entries for a computer that was disconnected from the VPN 2 hours earlier - so I think there are a few bugs that need sorting out...

Please Log in or Create an account to join the conversation.

More
06 Jul 2010 10:31 #62722 by howard simpson
Replied by howard simpson on topic 2820n 3.3.4 DHCP bug?
Still on 3.3.4 and have checked the the NAS box sys log, it is getting its DHCP renewed with no problems every 36h! It is still in the bind IP to MAC table in the 2820 at 192.168.1.10 and the start IP address is 192.168.1.10.

Howard

Please Log in or Create an account to join the conversation.

More
06 Jul 2010 10:38 #62723 by mph
Replied by mph on topic 2820n 3.3.4 DHCP bug?

Howard Simpson wrote: Still on 3.3.4 and have checked the the NAS box sys log, it is getting its DHCP renewed with no problems every 36h! It is still in the bind IP to MAC table in the 2820 at 192.168.1.10 and the start IP address is 192.168.1.10.


Seems to be a problem with devices that come and go, rather than just regular renewals. I've got problems with laptops (some are wired only) and (cough) iPhones that are coming and going from offices.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami