DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Basic question....installing a Vigor 2710n for a BThomehub

  • giuliog
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Jun 2010 21:50 #62493 by giuliog
Hi all

Sorry for the basic question but I tried reading and searching this site but not knowing a lot on the subject I find myself having to ask.

I recently installed a Draytek in place of my HomeHub and now find that my wired and wireless network does not work as it was doing so before.
An example would be: I have a Media Streamer that I could see in Network places and was able to copy files over to. Now I can't see it anymore. Another problem I have is a network drive that does not show up in network places anymore but I can still access it with a shortcut I have on my desktop. I tried to connect my BTHomehub back and it all works again. What setting do I need to change to get this working again?

I did try playing about with the Firewall setting etc but nothing I tried worked :p

Thanks for taking the time to look.

Giulio

Model Name : Vigor2710 Series
Firmware Version : 3.3.2_232201
Build Date/Time : Dec 4 2009 20:53:40
ADSL Firmware Version : 232201_A Hardware: Annex A

Please Log in or Create an account to join the conversation.

More
27 Jun 2010 17:01 #62519 by voodle
Check the IP addresses of all connected devices? It may be that they're not updating when you switch the routers over.
Also, try accessing that media streamer and network drive via IP and see if that works any better

Please Log in or Create an account to join the conversation.

More
12 Aug 2010 11:24 #63296 by stim
Perhaps you need to enable UPNP.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami