DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820vn 3.3.4 firmware problem

More
25 Jun 2010 23:04 #62495 by destroyer
Replied by destroyer on topic 2820vn 3.3.4 firmware problem
I could be mistaken but this is supposedly corrected in 3.3.4 - the "2. NAT Loopback " thingy is actually for 3.3.2.1.

3.3.4 contains: 35. Corrected: NAT loopback issue

Please Log in or Create an account to join the conversation.

More
26 Jun 2010 15:40 #62503 by mikeysoft
Replied by mikeysoft on topic 2820vn 3.3.4 firmware problem
That's for 3.3.3 not 3.3.4, and isn't for NAT loopback with WAN IP alias, just NAT loopback. The fix mentioned in item 35 in the revision notes for 3.3.3 must in fact be what broke NAT loopback for WAN IP alias at 3.3.3.

I've installed 3.3.4 and NAT loopback is still broken (with WAN IP alias).

Please Log in or Create an account to join the conversation.

  • pkecun
  • Visitor
  • Visitor
28 Jun 2010 20:57 #62546 by pkecun
Replied by pkecun on topic 2820vn 3.3.4 firmware problem
QoS over VPN is broken in 3.3.4 also.

Downgraded to 3.3.3 and it works again.

I'll e-mail support when I've got access to a physical unit & serial.

Please Log in or Create an account to join the conversation.

  • catzi
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
28 Jun 2010 21:23 #62547 by catzi
Replied by catzi on topic 2820vn 3.3.4 firmware problem
Funnily enough I've been setting up QOS over a site-to-site VPN for a customer with 3.3.3. There's another two routers that won't be going to 3.3.4.

Please Log in or Create an account to join the conversation.

  • six_impressive_hours
  • Offline
  • New Member
  • New Member
More
07 Jul 2010 21:16 #62754 by six_impressive_hours
Replied by six_impressive_hours on topic 2820vn 3.3.4 firmware problem
NAT loopback on static range broken here also when 3.3.4 is installed.

3.3.3 is fine though. Think I'll skip this "upgrade" :)

jamesy

Please Log in or Create an account to join the conversation.

More
07 Jul 2010 21:21 #62755 by mikeysoft
Replied by mikeysoft on topic 2820vn 3.3.4 firmware problem
3.3.3 is broken, it's the use of WAN IP Alias along with a block of static IPs that makes it break.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami