DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Port forward port 22, policy blocked 22 yet still access.

  • spudster
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Jun 2010 17:57 #62445 by spudster
Hi,

I have a 2820Vn.

I wish to ssh into a system (not the router) on my network from selective WAN IPs.

What I did (and what has worked for any other port!)

1) Opened port 22 to an internal address 10.0.0.10
2) Set up a blanket block of port 22 for all WAN (if no further match)
3) Allowed IP group "WAN Trusted" which contains selective trusted IPs access to port 22 (pass immediately)

However upon doing so port 22 is wide open to the whole internet on 10.0.0.10, regardless of the blanket port block!

Help?

Images.


[/img]

Please Log in or Create an account to join the conversation.

More
23 Jun 2010 09:01 #62446 by rothers
Try using redirect instead, i.e. 22 Wan to 22 10.0.0.10

Please Log in or Create an account to join the conversation.

  • spudster
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
23 Jun 2010 09:11 #62448 by spudster

rothers wrote: Try using redirect instead, i.e. 22 Wan to 22 10.0.0.10



Thanks for the response. I tried this but unfortunately still no luck. Exactly the same, the firewall does not block the "any" wan port 22 traffic like it should.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami