DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2820 nat setup

  • stussy73
  • Topic Author
  • Offline
  • New Member
  • New Member
More
15 Jun 2010 15:53 #62360 by stussy73
Vigor 2820 nat setup was created by stussy73
Hi

I've looked through the excellent FAQ's, but I must be missing something to get our router set up and accessing the net.

The router is connecting fine to our ISP - gets an IP address, gets DNS servers completed. However we can't browse the net properly. Bizarrely we can see google and microsoft , but after that - nothing. If we google for anything (speedtest as an example), we get a list of results as per norm, but clicking any of them just results in a timeout and no page.

Our ISP (virtual-1) have said:

"From what I can gather from the notes and screen shots the router is 10.0.0.11/24. The PC is going direct to the router, is this set up to do NAT?
THis would normally be done by a firewall and the PC would have the firewall as its gateway."

I can see the NAT options on the router, but what exactly are we meant to be putting in here? We just want (initially) all PCs on our network to be able to get to the outside world, but nothing to get in (until we set up some forwarding for a couple of users).

From the status page:

Model Name : Vigor2820
Firmware Version : 3.3.3_232201
Build Date/Time : Oct 23 2009 15:23:15
ADSL Firmware Version : 232201_A Hardware: Annex A

TIA

Mike

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami