DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

AP700 - NAS box connected to ethernet point?

  • oxygendebt
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
28 May 2010 23:52 #62167 by oxygendebt
I have a 2820n connected to a AP-700 in AP Bridge-WDS mode to improve the wireless coverage throughout my house. All works perfectly.

I have a spare NAS box which I would like to utilise, but don't want it in the room where the main 2820n router (and switch) reside.

Is there any reason why I can't have it accessible on the network by plugging into the ethernet port on the AP700? I use AP Briidge-WDS mode so I can bind IP and MAC addresses - the NAS box would retain a fixed IP address.

many thanks

Jon

Please Log in or Create an account to join the conversation.

More
03 Jun 2010 01:41 #62205 by voodle
That'd work, since you're using WDS bridge, it'll pass through the MAC address for the NAS properly and when in WDS, both the ethernet and wireless would go across the bridge simultaneously.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami