DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

DMZ on 2820 doesn't work properly

  • simonicemans
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
21 May 2010 21:55 #62096 by simonicemans
DMZ on 2820 doesn't work properly was created by simonicemans
I have a 2820 connected with single ADSL WAN (WAN1) to the internet and behind this I have a 2910.

I have 2 public IP addresses, one is allocated to the 2820.

I have entered the other as a WAN alias on the 2820.

I have set the 2910 as the DMZ host in the 2820's settings.

As a test, I have set the telnet port for the 2910 to 5555.

Now....

If I connect from the internet to the second public IP address port 5555, I get the telnet server on the 2910.

If I connect from the internet to the seconf public IP address port 80, I get the web server on the 2820, NOT the 2910 as expected.

It seems like a bug?

This behaviour is the same on firmware 3.3.3 and 3.3.4RC5.

Anyone else using 2820's DMZ host facility successfully? Are there any other things I need to set?

Please Log in or Create an account to join the conversation.

More
27 May 2010 01:48 #62142 by wywywywy
Replied by wywywywy on topic DMZ on 2820 doesn't work properly
Make sure in the Port Redirection, the WAN IP is not set to "All"?

Please Log in or Create an account to join the conversation.

  • simonicemans
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
27 May 2010 08:45 #62145 by simonicemans
Replied by simonicemans on topic DMZ on 2820 doesn't work properly
There are no port redirections set at all.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami