DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 3300V+ and NAT

  • alexrixhardson
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 May 2010 15:25 #62074 by alexrixhardson
Draytek 3300V+ and NAT was created by alexrixhardson
Hi guys,

I have Draytek 3300V+ and am trying to set up NAT. I have the latest 2.6.1.0 (EN) firmware installed, and the following configuration:

- WAN1 and WAN2 are configured for load balancing (properly configured, connected and both pingable)
- LAN1 is connected to my LAN 111.111.111.0/255.255.255.0 subnet (also works OK)

Now, I want to route port 443 (SSH) from WAN2 to server in my LAN (local server's IP=111.111.111.11). I did the following:

- I selected menu Advanced / NAT / Port Redirected,
- I added new port redirection (enabled, protocol TCP, public port 443, private IP 111.111.111.11, Public IP = "Wan Interface", WAN interface = "WAN2")

However, nothing gets forwarded to the 111.111.111.11 if I try to access 443 from outside. Could you guys help assist me? What did I miss?

Regards,
Alex

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami