DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor2600 + Buffalo G54 bridge - Admin IP?

  • redrhino
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 May 2010 15:30 #62047 by redrhino
Hi,

I have a Vigor2600 (with three wired pcs) plus a connected Buffalo G54 acting as a wifi bridge to other computers. All has been working well for 5 years but I now need to make a couple of changes to the Buffalo G54 unit - however, I can't find out what IP its admin is on!

I spoke with Buffalo Tech support and they say the Vigor2600 is assigning an IP in 'client' mode - can anyone advise me how to find out what this IP is?

Thanks.

Please Log in or Create an account to join the conversation.

More
18 May 2010 17:48 #62058 by voodle
Replied by voodle on topic Vigor2600 + Buffalo G54 bridge - Admin IP?
look in the ARP cache under Diagnostic Tools and if the buffalo doesn't have a name entry then look up the MAC address against this list:

http://www.coffer.com/mac_find/?string=buffalo

Please Log in or Create an account to join the conversation.

  • redrhino
  • Topic Author
  • Offline
  • New Member
  • New Member
More
19 May 2010 09:09 #62066 by redrhino
Replied by redrhino on topic Vigor2600 + Buffalo G54 bridge - Admin IP?

Voodle wrote: look in the ARP cache under Diagnostic Tools and if the buffalo doesn't have a name entry then look up the MAC address against this list:

http://www.coffer.com/mac_find/?string=buffalo



Thanks.

There's only one listing there ... 192.168.1.10 and that's the IP assigned to my PC by the router. The Buffalo G54 is connected but not listed?

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami