DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2x 2820n and 2x DSL

  • mac605
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 May 2010 16:29 #61900 by mac605
2x 2820n and 2x DSL was created by mac605
Current status:
2820n with BT DSL line, acting as router for small network (main router/DSL).

Changes:
I will get another DSL line and another 2820n for this line (backup router/DSL).

Target:
I have to set 2820n's that users should be able to transparently use both DSL connections.

Concept:
Setup 2nd 2820n as DSL modem only, passing traffic through to 1st 2820n, to route it on local network.

But according to manual it's only possible to passthrough traffic to LAN interfaces, not WAN2.

So should I connect WAN2 on 1st router to LAN port on 2nd router? Will it work?

Please Log in or Create an account to join the conversation.

More
04 May 2010 19:02 #61904 by the pit
Replied by the pit on topic 2x 2820n and 2x DSL
Why buy another 2820 when it's already got two ports???

Please Log in or Create an account to join the conversation.

More
05 May 2010 12:21 #61912 by runningdeere
Replied by runningdeere on topic 2x 2820n and 2x DSL
It will work, but why buy another full blown router when all you need is an ADSL modem?

Please Log in or Create an account to join the conversation.

  • mac605
  • Topic Author
  • Offline
  • New Member
  • New Member
More
05 May 2010 12:52 #61914 by mac605
Replied by mac605 on topic 2x 2820n and 2x DSL

runningdeere wrote: It will work, but why buy another full blown router when all you need is an ADSL modem?



It was not my decision, previous IT guy bought it, probably just to have a backup router in case of any problems with 1st one - kind of RAID-1 for routers ;)

Thanks for confirmation that it should work :)

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami