DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Router setup

  • terminatorx
  • Topic Author
  • Offline
  • New Member
  • New Member
More
13 Apr 2010 13:27 #61647 by terminatorx
Router setup was created by terminatorx
My client has a BT ADSL line and a router issuing a standard subnet 192.168.1.x / 255.255.255.0. I have a couple of pc's with addresses that cannot be changed, 192.168.10.123 & 124. Can I configure a VIGOR 2820 to allow the two pc's to access the internet through my clients router?

Phillip

Please Log in or Create an account to join the conversation.

More
14 Apr 2010 12:28 #61658 by runningdeere
Replied by runningdeere on topic Router setup
Any reason why you can't just change your clients router to use the .10 subnet instead?

Please Log in or Create an account to join the conversation.

More
14 Apr 2010 13:31 #61661 by stuc
Replied by stuc on topic Router setup
Changing them makes most sense but you could set the second subnet address on the vigor to the .10 range and the give the router the gateway address they are "expecting" to see as a gateway.

Tries to think if that routes to internet... think it does.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami