DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 with a 3300v

  • swizzuk
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
12 Apr 2010 11:24 #61627 by swizzuk
2820 with a 3300v was created by swizzuk
Hi All,

Currently have around 6 2820's deployed over two sites. Looking to move to use 3300v to create better failover and vpn links.

The 3300v is specified to work with the 120s, however, rather than purchase a load of 120s, would the 2820s work with the 3300v.
Although majority of the settings in the 2820s will be handled by the 3300v, would they still work as (just expensive) broadband modems for the 3300v?

cheers

Please Log in or Create an account to join the conversation.

More
12 Apr 2010 14:20 #61631 by voodle
Replied by voodle on topic 2820 with a 3300v
You can do that by putting the routers into Bridge mode (with an MPoA connection) or PPPoE pass-through mode (for a PPPoA connection. There's a tickbox for those on the relevant PPPoA/MPoA settings pages, once you tick that and apply it then it'll act as a rather expensive modem :)

Please Log in or Create an account to join the conversation.

  • swizzuk
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
13 Apr 2010 10:36 #61642 by swizzuk
Replied by swizzuk on topic 2820 with a 3300v
Perfect! Thanks!

An expensive modem yes, but business owner won't let me spend additional money to replace the 2820s with the 120s, so expensive modem it is!

Please Log in or Create an account to join the conversation.

  • swizzuk
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
14 Apr 2010 15:14 #61664 by swizzuk
Replied by swizzuk on topic 2820 with a 3300v
Just trying to figure this out.

Have checked the tick box on the PPPoE/PPPoA section on the 2820s.

Do I then add the login details for the ADSL account onto the 2820?

The adsl account uses PPPoA, Chap, VC-Mux and I have a static IP.

What do i then set the 3300v Wan config as?

Any assistance greatly appreciated.

Please Log in or Create an account to join the conversation.

More
14 Apr 2010 16:53 #61666 by njh
Replied by njh on topic 2820 with a 3300v

swizzuk wrote: An expensive modem yes, but business owner won't let me spend additional money to replace the 2820s with the 120s, so expensive modem it is!


Tell him he should be able to sell the 2820's on fleabay for more than 120's would cost. :wink:

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

More
14 Apr 2010 17:48 #61668 by voodle
Replied by voodle on topic 2820 with a 3300v

swizzuk wrote: Just trying to figure this out.

Have checked the tick box on the PPPoE/PPPoA section on the 2820s.

Do I then add the login details for the ADSL account onto the 2820?

The adsl account uses PPPoA, Chap, VC-Mux and I have a static IP.

What do i then set the 3300v Wan config as?

Any assistance greatly appreciated.



On the 2820s, assuming that the firmware is 3.3.3, once you tick PPPoE pass-through, it'll grey out the username/password settings, so it won't try to dial anymore.
On the 3300V, you would set up the WAN connection as PPPoE, enter the username and password details as well as the static IP address on there, there's also a field for Service Name, which needs to be left blank for it to work.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami