DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2910 SERIES (2 WAN ports CAPACITY)

  • CyberSPHiNX
  • Topic Author
  • Visitor
  • Visitor
08 Apr 2010 18:52 #61595 by CyberSPHiNX
Vigor 2910 SERIES (2 WAN ports CAPACITY) was created by CyberSPHiNX
I have :
First WAN port connected to Internet : RX 16 Mbit/s, TX 1Mbit/s
Second WAN port connected to Internet : RX 16 Mbit/s, TX 1Mbit/s

Load balancing mode is ON (According to line speed).
Also through 16-ports Switch connected 11 computer.
Question:
Whether there will be a common capacity of two WAN ports are 32 Mbit/s for download and 2Mbits for Upload simultaneously ?
[/b]

Please Log in or Create an account to join the conversation.

More
09 Apr 2010 10:52 #61601 by voodle
Replied by voodle on topic Vigor 2910 SERIES (2 WAN ports CAPACITY)
The max throughput of the 2910 series is around 15-20 mbps if you look at this table:
http://draytek.co.uk/products/comparison.html
The firewall throughput is the relevant one, you'd need to go with something faster to get full capacity. That is assuming at both lines are connecting at 16Mbps, usually ADSL2+ speeds are lower than that depending on the distance from the telephone exchange.

Please Log in or Create an account to join the conversation.

More
10 Apr 2010 10:07 #61614 by admin
Replied by admin on topic Vigor 2910 SERIES (2 WAN ports CAPACITY)
I think he was asking not about throughput but whether the two feeds would aggregate, which they won't.



Forum Administrator

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami