DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Second IP Subnet Setup

  • darren-mc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Mar 2010 08:32 #60966 by darren-mc
Second IP Subnet Setup was created by darren-mc
OK this is driving me nuts and I wonder if someone help me.

I have a subnet from my isp

81.174.254.GW (Gateway)
81.174.254.Adr1 (ISP assigned router address)
81.174.254.Adr2
etc...

subnet 255.255.255.240

Now traditionally I have only used a subset of these addresses as NAT. I would like to start using the the additional IP addresses in 2nd Subnet function:

I have entered the 81.174.254.Adr2 and
subnet 255.255.255.240 into the 2nd subnet config.

I have then put a PC on the network with
81.174.254.Adr3
subnet 255.255.255.240
GW: 81.174.254.Adr2

and this works. The PC can gain access to the internet.

However, the PC cannot gain access to any resource which has been configured under that WAN1 IP Alias ( Multi-NAT) and has NAT and firewall rules (say an internal mail server) what am I doing wrong?

Thanks

Darren

Please Log in or Create an account to join the conversation.

More
05 Mar 2010 23:11 #61022 by dannyboy1121
Replied by dannyboy1121 on topic Second IP Subnet Setup

what am I doing wrong?



Not telling us what Draytek you're running?

Dan

Please Log in or Create an account to join the conversation.

  • darren-mc
  • Topic Author
  • Offline
  • New Member
  • New Member
More
06 Mar 2010 08:09 #61027 by darren-mc
Replied by darren-mc on topic Second IP Subnet Setup
sorry... :oops:

Its a 2820

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami