DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Upgraded firmware on Vigor 2600. Works fine, but no Web GUI

  • rhumby
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Feb 2010 21:02 #60787 by rhumby
Used the TFTP program to upgrade to the latest firmware (.all file). Seemed to work ok.

It reset, and connected - all users ok. But no web gui any more. Errors:

"File system invalid. The file system of web-based UI is incinsistent with router's firmware. Please check the firmware version".

I can telnet to it. Is there a telnet command to enable the GUI?

Please Log in or Create an account to join the conversation.

More
25 Feb 2010 22:57 #60790 by cyber-mav
looks like you put the wrong firmware on or corrupt firmware.

Please Log in or Create an account to join the conversation.

More
25 Feb 2010 23:46 #60795 by voodle
Yeah that's mostly caused by a bad config, reflash it with the .rst file and you should have a working router again.

Please Log in or Create an account to join the conversation.

  • rhumby
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Feb 2010 17:31 #60817 by rhumby
Will do. Many thanks.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami