DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2800 Port 80 Filter Setup

  • vanillaice
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Feb 2010 11:21 #60417 by vanillaice
Vigor 2800 Port 80 Filter Setup was created by vanillaice
Hi,

I am trying to stop a local PC from having access to all websites (Port 80), but wish to allow AV updates to still come through. Therefore I do not wish to block all internet access to the PC.

I have followed the FAQ guide found here: http://www.draytek.co.uk/support/kb_vigor_filtering.html

However, it hasn't worked. After I apply the settings, the destination start and end ports I enter disappear.

Am I missing something?

I am offsite at the moment, but I am certain the router is running the latest official firmware.

Thanks in advance,

ICE

Please Log in or Create an account to join the conversation.

More
08 Feb 2010 11:35 #60418 by rothers
Replied by rothers on topic Re: Vigor 2800 Port 80 Filter Setup

vanillaice wrote: After I apply the settings, the destination start and end ports I enter disappear.
Am I missing something?


You haven't selected a protocol.

Please Log in or Create an account to join the conversation.

  • vanillaice
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Feb 2010 11:36 #60419 by vanillaice
Replied by vanillaice on topic Vigor 2800 Port 80 Filter Setup
I'm certain I had selected TCP as shown in the screen shot of the instructions.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami