DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Updating Draytek Vigor 2820 firmware

  • andrejs.sokolovs
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Jan 2010 17:41 #60141 by andrejs.sokolovs
Updating Draytek Vigor 2820 firmware was created by andrejs.sokolovs
Hi

I need to update firmware for Draytek Vigor 2820 on a remote site, so I have 2 questions:


1. Will the config be retained or will it be reset to default one?
2. If config is restored to default one after firmware update, will I be able to restore backed up configuration remotely?

Please Log in or Create an account to join the conversation.

More
29 Jan 2010 09:17 #60152 by voodle
Replied by voodle on topic Updating Draytek Vigor 2820 firmware
1. If you use the .all file, it will just update the firmware specifically, the .rst firmware will restore the factory config.
2. You can do this, but obviously you'd need to get it online somehow with default settings, quite awkward to do remotely.

Please Log in or Create an account to join the conversation.

More
01 Feb 2010 12:23 #60213 by sbv3000
Replied by sbv3000 on topic Updating Draytek Vigor 2820 firmware
setup rdp to a pc on the remote lan and run the .all update from that. after reboot you should be able to reconnect once one of the wan links comes back up.
other option is go to my pc. that will reconnect automatically once the wan is up.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami