DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Static Route

  • miktdish
  • Topic Author
  • Offline
  • New Member
  • New Member
More
06 Jan 2010 17:34 #59677 by miktdish
Static Route was created by miktdish
Hi

I have a 2820 and have setup an Epygi VoIP server on a separate switch whose WAN port is the LAN port on the 2820. The LAN port of the Epygi is serving 172.30.0.0/32 IP addresses. The LAN side of the 2820 is 102.168.15.0/32

How can I get to the 172.30.0.0 addresses when on the 192.168.15.0 side ?

Do I need a static route ?
Any help greatly appreciated ... :)

--
Mik

SSETiC

Please Log in or Create an account to join the conversation.

More
06 Jan 2010 21:15 #59680 by lozstlouis
Replied by lozstlouis on topic Static Route
The Epygi WAN port must have a 192.168.15.x address right?

Think you can do this on the 2820 via static route under LAN menu.

Or set a static route in Windows pointing to that:

route add 172.30.0.0 mask 255.255.255.255 102.168.15.x

x is the IP address of the epygi unit. Use the /persist switch to make it permanent.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

  • miktdish
  • Topic Author
  • Offline
  • New Member
  • New Member
More
08 Jan 2010 18:33 #59717 by miktdish
Replied by miktdish on topic Static Route

lozstlouis wrote: The Epygi WAN port must have a 192.168.15.x address right?
//snip// 'the gateway' is the IP address of the epygi unit. Use the /persist switch to make it permanent.



Greetings and thanks - that was the bit I was missing, using the Epygi as the gateway - I was using the router (15.1) DoH!

Yes the IPBX needs two sides, the phones are on the internal/LAN and the external/WAN is the Internet which in my case (because i'm in complicated mode) is the Small Business Server and my office LAN.

The Epygi is only 100MB whereas the Netgear switch and the office LAN is 1GB.

Thanks - i'm up and running now :)

--
Mik

SSETiC

Please Log in or Create an account to join the conversation.

More
11 Jan 2010 09:50 #59738 by lozstlouis
Replied by lozstlouis on topic Static Route
No probs.

www.alits.co.uk

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami