DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Setting up Vigor2820 for BT Help!

  • rax0983
  • Topic Author
  • Offline
  • New Member
  • New Member
More
02 Jan 2010 12:47 #59587 by rax0983
Setting up Vigor2820 for BT Help! was created by rax0983
Hi I have a Vigor 2820 and am having problems setting it up to work for BT

Please could someone go through the ADSL settings to make it connect to the internet because I've not had much luck myself! :?

If you could I would be very grateful!

Thanks,
Rax0



My Router:
DrayTek Vigor2820 Series

My ISP:
BT Broadband

Please Log in or Create an account to join the conversation.

More
02 Jan 2010 14:51 #59589 by nelvon
Replied by nelvon on topic Setting up Vigor2820 for BT Help!
WE also have a BT connection through a 2820n
These are our settings and we connected straight away.

From the Menu choose:

WAN ==> Internet Access

PPPoE/PPPoA ==> Enable


DSL Modem Settings:
Multi-PVC channel = Channel 1
VPI = 0
VCI = 38
Encapsulating Type = VC MUX
Protocol = PPPoA
Modulation Multimode

ISP Access Setup:
Username = (supplied by BT)
Password = (supplied by BT)
PPP Authentication = PAP or CHAP

IP Address from ISP
Fixed IP = Choose Dynamic even if you have a fixed IP
(I found this out from the Draytrek Connection Support line - Free)

Like you I have just signed up to BT and connected just before Christmas. Everything still running smoothly.

Good Luck

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami