DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Be Unlimited Internet 24meg and 2820n

More
28 Jan 2010 15:25 #60137 by voodle
Replied by voodle on topic Be Unlimited Internet 24meg and 2820n
when you telnet into the router, type:
adsl status

Please Log in or Create an account to join the conversation.

More
28 Jan 2010 15:28 #60138 by joelang1699
Replied by joelang1699 on topic Be Unlimited Internet 24meg and 2820n
thanks mate!

Please Log in or Create an account to join the conversation.

More
16 Feb 2010 21:33 #60571 by smiler
Replied by smiler on topic Be Unlimited Internet 24meg and 2820n
I just changed to Be Pro 24Mb ADSL2+ service from BT 8Mb G.DMT.
I could not get my 2820 at firmware 3.3.3 to work, I had to put the Thomson modem Be supplied on first on the line, then it started to work, I got 19.1970Mbs down and 1.403Mb up.
I then put back my 2820Vn and it started to work as well ????
Better upload speed with 17.89Mb down and 2.425Mb up, which is a nice tradeoff for me.
Code:
VIGOR> adsl status --------------------------- ATU-R Info (hw: annex A, f/w: annex A) ----------- Running Mode : G.992.5 annexM State : SHOWTIME DS Actual Rate : 17890000 bps US Actual Rate : 2425000 bps DS Attainable Rate : 17800000 bps US Attainable Rate : 2425000 bps DS Path Mode : Interleave US Path Mode : Interleave DS Interleave Depth : 160 US Interleave Depth : 1 NE Current Attenuation : 23 dB Cur SNR Margin : 3 dB DS actual PSD : 16. 5 dB US actual PSD : 12. 7 dB ADSL Firmware Version : 232201_A -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 13 dB Far SNR Margin : 3 dB CO ITU Version[0] : 00004244 CO ITU Version[1] : 0000434d DSLAM CHIPSET VENDOR : < BDCM >


I put the profile option of 'Optimise for speed' which I suppose runs things at a lower s/n ratio. Do these numbers look ok ? 550 metres from exchange.

Please Log in or Create an account to join the conversation.

More
17 Feb 2010 14:19 #60584 by gcp
Replied by gcp on topic Be Unlimited Internet 24meg and 2820n
All works fine for me. I just changed from BT to BE, adjusted the settings and I'm getting this...

ROUTER> adsl status

ATU-R Info (hw: annex A, f/w: annex A)

Running Mode : ADSL2+(G.992.5) State : SHOWTIME
DS Actual Rate : 6614000 bps US Actual Rate : 1173000 bps
DS Attainable Rate : 8384000 bps US Attainable Rate : 1173000 bps
DS Path Mode : Fast US Path Mode : Fast
DS Interleave Depth : 96 US Interleave Depth : 1
NE Current Attenuation : 40 dB Cur SNR Margin : 9 dB
DS actual PSD : 18. 2 dB US actual PSD : 12. 2 dB
ADSL Firmware Version : 232201_A

ATU-C Info

Far Current Attenuation : 21 dB Far SNR Margin : 6 dB
CO ITU Version[0] : 00004244 CO ITU Version[1] : 0000434d
DSLAM CHIPSET VENDOR : < BDCM >

Please Log in or Create an account to join the conversation.

More
23 Feb 2010 19:06 #60733 by winber
Replied by winber on topic Be Unlimited Internet 24meg and 2820n
Just got O2 Pro activated today (was on Tiscali).

I haven't bothered opening up the Wireless III box yet. My connection info is shown below, I'm just over 1KM from the exchange.

To get Annex M, do you have to ring up O2 and ask them to enable? Or should I upgrade from Firmware 3.3.2.1_232201 do you think?

Code:
> adsl status --------------------------- ATU-R Info (hw: annex A, f/w: annex A) ----------- Running Mode : ADSL2+(G.992.5) State : SHOWTI ME DS Actual Rate : 17171000 bps US Actual Rate : 1181000 bps DS Attainable Rate : 17104000 bps US Attainable Rate : 1181000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 256 US Interleave Depth : 1 NE Current Attenuation : 26 dB Cur SNR Margin : 6 dB DS actual PSD : 16. 9 dB US actual PSD : 12. 2 dB ADSL Firmware Version : 232201_A -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 12 dB Far SNR Margin : 6 dB CO ITU Version[0] : 00004244 CO ITU Version[1] : 0000434d DSLAM CHIPSET VENDOR : < BDCM >

Please Log in or Create an account to join the conversation.

More
24 Feb 2010 10:19 #60742 by voodle
Replied by voodle on topic Be Unlimited Internet 24meg and 2820n
Usually you have to set ADSL2+ Annex M manually as the modulation type for it to use it.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami