DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigorphone 350

  • tonybee
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Dec 2009 16:51 #59527 by tonybee
Vigorphone 350 was created by tonybee
I am connecting through a 2820Vn Lan port to a Draytel account. I get a dial tone and the phone at the other end rings but I cannot hear the person speaking and they cannot here me. If I try and call the 350 the phone does not ring or answer. If I Plug an analogue phone into one of the phone ports and use the same Draytel account all works ok. I have tried changing the codecs but that has not made any difference. Has anyone else out there had chance to play with the settings?

Please Log in or Create an account to join the conversation.

More
28 Dec 2009 17:49 #59528 by admin
Replied by admin on topic Vigorphone 350
The 'Vn' router is VoIP equipped so it's probably intercepting incoming VoIP packets (understandably). Change the SIP port (from 5060 to something else) on the router to see if the phone works okay they. The VoIP ports on the router won't work during that test.



Forum Administrator

Please Log in or Create an account to join the conversation.

  • tonybee
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Dec 2009 13:45 #59537 by tonybee
Replied by tonybee on topic Vigorphone 350
Sorry about the mis-information. The router is a 2900Vg. I changed the SIP port to 5080 on the router and left the phone SIP port at 5060. Still no joy

Please Log in or Create an account to join the conversation.

More
29 Dec 2009 15:17 #59538 by admin
Replied by admin on topic Vigorphone 350
okay, so try using a SIP/NAT proxy or a STUN server (see FAQ I think, either for DrayTEL or the router on this site)



Forum Administrator

Please Log in or Create an account to join the conversation.

  • tonybee
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Jan 2010 16:12 #60042 by tonybee
Replied by tonybee on topic Vigorphone 350
Apparently the guys at Draytek need to do a mod to get this to work. Not sure how long that is likely to take.
I can make calls but still cannot receive any. Bit of a waste of money really.
Thanks for your help admin re the stun server

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 13:01 #60646 by rcw8892
Replied by rcw8892 on topic Vigorphone 350
Hi

I am in the same position. 2820Vn and 2 x VigorPhone 350.

Phone says the SIP accounts are registered. Can dial out - phone rings - cannot hear anything on either end when aswered.

Dial in an nothing. Cannot receive any call nor make calls.

Been using normal phone for the past few months fine using the 2820vn set to use the SIP accounts.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami