DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2930 Router - Firewall stops

More
22 Dec 2009 16:09 #59481 by sam0r
2930 Router - Firewall stops was created by sam0r
I'm using a Draytek 2930 (FW: 3.2.2) to protect my two servers at a hosting centre down in london.

I've configured it using the firewall filter, to forward DNS, Web, SMTP, POP3 etc etc

The error occurs after approximately 10 minutes of uptime, it will just stop filtering all together, no traffic can get in or out with the exception of RDP which mysteriously still works! However, if I make ANY change to the firewall filter (ie. enable or disable a blank rule) it will sping to life again.

In the syslog I'm getting:

"Ethernet destination address doesn't match ARP target adress"

But I can't see anything else that looks out of place.

Any help would be greatly appreciated!

Please Log in or Create an account to join the conversation.

More
22 Dec 2009 19:04 #59490 by lozstlouis
Replied by lozstlouis on topic 2930 Router - Firewall stops
High traffic?

www.alits.co.uk

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami