DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Issue with Data Filter

  • adamkimber
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Dec 2009 12:11 #59396 by adamkimber
Issue with Data Filter was created by adamkimber
Hi All,

I have a 2820 with a Trixbox VoIP system sat behind it.

The Trixbox LAN IP is 192.168.25.60.

If I set the Filter Default Rule to "PASS" then incoming SIP calls (forwarded via Open ports) works okay.

If I set it to block, it doesn't work.

However, I have the IP for this trixbox in an IP Group which is set in the data filter to "Pass Immediately".

Anyone any ideas on anything I can check? All of my other LAN PCs are in the same IP Group and these can all get net access okay!

Please Log in or Create an account to join the conversation.

  • adamkimber
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Dec 2009 12:15 #59397 by adamkimber
Replied by adamkimber on topic Issue with Data Filter
I've added a single firewall rule for the Trixbox as a single address and it now works.

It seems that the IP address isn't being recognised whilst it's in the IP Group - oddness!

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami