DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor2710VN

  • select
  • Topic Author
  • Offline
  • New Member
  • New Member
More
17 Dec 2009 10:55 #59393 by select
Vigor2710VN was created by select
Hi all

I have installed a couple of routers before, have just swapped my talk talk router for a Vigor2710

I only intend using it as a wireless router.

Have plugged it in and accessed the amin page, have changed the passowrd and user name to my talk talk one

I cannot conenct

Have all the lights on etc, if I swap the leads onto talk talk one all is well.
Must besomething I have missed off
Can anyone please explain what steps I need to change for talk talk

Many Thanks

paul

Please Log in or Create an account to join the conversation.

More
26 Jan 2010 18:44 #60074 by nicp01
Replied by nicp01 on topic Vigor2710VN
try changing your password again..
also may take a while to sync up sometimes it locks up at the isp end..

Please Log in or Create an account to join the conversation.

More
27 Jan 2010 06:02 #60088 by dannyboy1121
Replied by dannyboy1121 on topic Vigor2710VN
You know what? The first time I set my 2710Vn ... I couldn't get it to connect to any SIP account (Draytel or Sipgate) for love nor money.

Firstly I had to reboot the router once the settings were in place before the 2710Vn would register. After this point, My calls would only work in one direction (i.e. I could dial out and the other end would hear me but I could hear nothing ... .no dial tone or person at the other end).

Secondly .. and surprisingly .. I corrected the problem by registering against the NAT address rather than the standard. Hey presto ..

Here's my config example:


Dan

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami