DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

NAT/Port forwarding/DMZ issue with Vigor 2820Vn

  • cjsoftuk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Nov 2009 18:51 #59049 by cjsoftuk
Hi,

I had a quick search but couldn't see anything on this subject, so thought I'd post up here.

We have a single WAN connection on a Draytek 2820Vn, which has 5 IP addresses.

One of these is reserved for the router itself, one is used for the exchange server, and now we want to add another (web/mail) server with certain ports available from outside.

The problem is, some of these ports are the same as for the exchange server.

The exchange server has 80, 443, 25 and 993 forwarded to it, and that works fine.

The new server, we did the same setup as for the exchange server (same ports need to be open), just different WAN IP, and it doesn't work.

Can somebody give/point me at a detailed guide on how to set up multiple servers using the same ports on different external IPs on a Draytek 2820Vn?

I should probably add that the two servers are on different VLans. I am not the admin of the router, but can get the admin to test stuff easily.

Cheers,

Chris

Please Log in or Create an account to join the conversation.

  • cjsoftuk
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Nov 2009 08:42 #59083 by cjsoftuk
Replied by cjsoftuk on topic OK, think I've found out how to fix it
On Monday I'll go through http://www.draytek.co.uk/support/kb_vigor_multinat.html with my network admin to try and fix this.

Can't believe I hadn't found it before. :oops:

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami