DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Have MTU telnet commands changed on 2820

  • stevenball
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Nov 2009 09:47 #58999 by stevenball
Have MTU telnet commands changed on 2820 was created by stevenball
I have managed to change the MTU settings on our 2800 router using the wan ppp_mss command, when I use this command on our 2820 I get the following message back.....

> wan ppp_ms ?
% Valid subcommands are:
mtu mtu2 DF_check disable forward modem
detect

If I try to set the MTU size using the following wan ppp_mss 1458 I get the same reply.

Any idea's on the correct syntax to use ?

Please Log in or Create an account to join the conversation.

More
24 Nov 2009 12:29 #59005 by voodle
Replied by voodle on topic Have MTU telnet commands changed on 2820
Yep, they've changed the MTU command from wan ppp_mss to wan mtu, so you'd need to enter wan mtu 1458 to change it now. I think the change was made with 3.3.3

Please Log in or Create an account to join the conversation.

  • stevenball
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
24 Nov 2009 12:38 #59006 by stevenball
Replied by stevenball on topic Have MTU telnet commands changed on 2820
Many thanks, thats great, I thought I was going mad. :D

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami