DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

can't log on to 5510

  • bob123
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
06 Nov 2009 12:00 #58692 by bob123
can't log on to 5510 was created by bob123
I've just factory reset our 5510 and upgraded to 3.3.3.2.

I can now only log on to it from the local network and not across any of the VPN's which I used to be able to.

I presume something is ticked that either didn't exist in the previous version of firmware or was changed when I reset.

Any (polite) suggestions gratefully received.

thanks.

Jeff

Please Log in or Create an account to join the conversation.

  • bob123
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
06 Nov 2009 12:02 #58693 by bob123
Replied by bob123 on topic can't log on to 5510
basically I get a blank page in Firefox.

Internet explorer 7 asks me for the username and password and then says

"Internet Explorer cannot display the webpage"

Please Log in or Create an account to join the conversation.

More
10 Nov 2009 14:20 #58754 by macavity
Replied by macavity on topic can't log on to 5510
Are you loging into the unit via IP or hostname? If hostname then try via IP to see if you get the same thing.

Is remote mangement enabled? If not, then as a test see if the behavour is the same after enabled remote management.

Please Log in or Create an account to join the conversation.

  • bob123
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
10 Nov 2009 14:23 #58755 by bob123
Replied by bob123 on topic can't log on to 5510
hi

i always use IP. It works within subnet. it always used to work within VPN.

remote management is off as I don't want access from "outside"

jeff

Please Log in or Create an account to join the conversation.

More
10 Nov 2009 14:51 #58756 by macavity
Replied by macavity on topic can't log on to 5510
The reason I suggested trying with remote management enabled is that A while back I've seen something similar on an older model, where access to web management via VPN only worked after remote management is enabled. I wondered if you might have come across the same thing.

Please Log in or Create an account to join the conversation.

  • bob123
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Mar 2010 21:59 #61205 by bob123
Replied by bob123 on topic can't log on to 5510
I've just upgraded to 3.3.4 and this problem and Syslog not working have both ween fixed. Hooray!

Now I can log in locally and across VPN's with "allow management from the internet turned off"

Syslog is now working for the first time in 18 months.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami