DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Help Using RIP

  • benway
  • Topic Author
  • Offline
  • New Member
  • New Member
More
28 Oct 2009 20:41 #58525 by benway
Help Using RIP was created by benway
I've got a hub and spoke type setup with a 2950 running firmware version 3.2.4 at the centre and a mixture of 2950, 2820 and 2800 connecting in.

I now need to route between the remote sites and thought rip was the answer but i'm having various success.

I haven't managed to get a 2800 to exchange routes at all with the 2950. I've got 2800s on firmware 2.8.2 which i believe is the latest.

Are the 2800s just not going to work ?

I've had mixed success with the 2820s and firmware version 3.3.2.1_232201 seems to work.

Anybody use RIP successfully and have hard and fast rules on
which hardware/firmware versions always work ?

TIA
Benway

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami