DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Virgin Media 50Mb and 2820n - Help Needed Slow LAN speeds

  • johnlil
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Oct 2009 19:18 #58498 by johnlil
VM 50Mb installed and direct connection to modem gives speeds c. 50Mbs all good.

Plugged into WAN2 on 2820n, using 3.3.2.1 firmware and WAN2 set to either auto negotiate, 100M full duplex or 100M half duplex then speed via LAN drops to c. 7~8Mbps. WiFi even slower, increased overhead I guess

WAN 1 is disabled

Reset to factory settings exactly the same, any ideas, I read a post from other users indicating all works seamlessly, well not for me!

Help needed

Please Log in or Create an account to join the conversation.

More
28 Oct 2009 18:37 #58524 by the pit
Well I've got twenty meg and no such problems. Will be going too 50 meg in November so if you've still got problems I'll let you know what happens.

Please Log in or Create an account to join the conversation.

More
29 Oct 2009 10:19 #58532 by spudster
I run the same router on my VM 50Mb connection. Get full 50Mb over gigabit LAN, but WiFi (n) struggles to surpass 30Mb online. Wierd as I can transfer files over wifi lan at around 70Mb. I think theres probably an processing power issue for WAN-WIFI over 30Mb.

I have mine set to auto negotiate.

Log into your modems status page (whilst behind your router)

modem-router-pc

http://192.168.100.1/

ensure it's showing 100 Full Duplex. (as mine does)

Please Log in or Create an account to join the conversation.

More
29 Oct 2009 18:24 #58540 by gordondack

Spudster wrote: I run the same router on my VM 50Mb connection. Get full 50Mb over gigabit LAN, but WiFi (n) struggles to surpass 30Mb online. Wierd as I can transfer files over wifi lan at around 70Mb. I think theres probably an processing power issue for WAN-WIFI over 30Mb.

I have mine set to auto negotiate.

Log into your modems status page (whilst behind your router)

modem-router-pc

http://192.168.100.1/

ensure it's showing 100 Full Duplex. (as mine does)



Mine only shows half duplex, with no way of amending this.

Please Log in or Create an account to join the conversation.

More
29 Oct 2009 18:27 #58541 by spudster

gordondack wrote:

Spudster wrote: I run the same router on my VM 50Mb connection. Get full 50Mb over gigabit LAN, but WiFi (n) struggles to surpass 30Mb online. Wierd as I can transfer files over wifi lan at around 70Mb. I think theres probably an processing power issue for WAN-WIFI over 30Mb.

I have mine set to auto negotiate.

Log into your modems status page (whilst behind your router)

modem-router-pc

http://192.168.100.1/

ensure it's showing 100 Full Duplex. (as mine does)



Mine only shows half duplex, with no way of amending this.



Which modem did they give you?

I had my 50Mb installed 2 days ago and got the VMNG300 modem.

Please Log in or Create an account to join the conversation.

More
29 Oct 2009 18:29 #58542 by gordondack

Spudster wrote:

gordondack wrote:

Spudster wrote: I run the same router on my VM 50Mb connection. Get full 50Mb over gigabit LAN, but WiFi (n) struggles to surpass 30Mb online. Wierd as I can transfer files over wifi lan at around 70Mb. I think theres probably an processing power issue for WAN-WIFI over 30Mb.

I have mine set to auto negotiate.

Log into your modems status page (whilst behind your router)

modem-router-pc

http://192.168.100.1/

ensure it's showing 100 Full Duplex. (as mine does)



Mine only shows half duplex, with no way of amending this.



Which modem did they give you?

I had my 50Mb installed 2 days ago and got the VMNG300 modem.



Same type, I think they only use 1 type for 50mb

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami