DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2 x Vigor 2820 WAN2

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Sep 2009 19:25 #57775 by testsubjec
2 x Vigor 2820 WAN2 was created by testsubjec
Hi folks,

I have got two internet connections coming into the building with a Vigor 2820 on each. My plan was to connect Router 2 from the gigabit port into the WAN2 port on Router 1 and load balance on Router 1.

Is this possible??

Thanks

Please Log in or Create an account to join the conversation.

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Sep 2009 14:30 #57784 by testsubjec
Replied by testsubjec on topic 2 x Vigor 2820 WAN2
Further to the above post.

I have now configured two Vigor 2820 routers (Router 1 - 192.168.11.254, Router 2 - 192.168.12.254) and a Vigor 2930 Dual WAN router (Router 3 - 192.168.10.254), WAN1 - 192.168.11.1, WAN2 - 192.168.12.1

So Router 1 is plugged into Router 3 WAN1, and Router 2 is plugged into Router 3 WAN2.

Everything is working without a problem. :-)

However, on Router 1 we have 8 users which VPN in and the problem I have got is they pickup a 192.168.11.0 address and they need to be able to access resources on the 192.168.10.0 network.

I thought I could configure a static route so that router 1 could communicate with the 192.168.10.0 network and this doesnt work.

Please could someone help me out.

Thanks

Please Log in or Create an account to join the conversation.

More
19 Sep 2009 16:05 #57786 by njh
Replied by njh on topic 2 x Vigor 2820 WAN2
It looks like you have money to burn!

I do not have a 2820 but they have a built in fail-over mechanism and a second (ethernet) WAN port. The cheapest way to have done it would be to have one 2820 with one ADSL line. Connect the WAN port of the 2820 to another ADSL modem (say a Draytek 120) in bridge mode and you're off. Now that you have 2 * 2820, see if the 2820 can be put into bridge mode (look for connection type something like PPPoE) so it just works like a modem. If it does, put one 2820 into bridge mode and connect it to your second ADSL line. Connect one of its LAN ports to the WAN port of the other 2820 and you should be away with none of this double-natting you are doing now. Your VPN should also work as you want.

I'd be happy to look after the spare 2930 you now have.......

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

  • testsubjec
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
19 Sep 2009 17:03 #57787 by testsubjec
Replied by testsubjec on topic 2 x Vigor 2820 WAN2
From the example you have put there, would it be possible to put both 2820 routers in bridge mode and allow the 2930 to do everything??

Please Log in or Create an account to join the conversation.

More
19 Sep 2009 17:46 #57788 by njh
Replied by njh on topic 2 x Vigor 2820 WAN2
As long as the 2820 will go into bridge mode, yes you could, but what is the point? It is a waste of the 2820's capability.

Personally, I'd go for the 2820 plus another ADSL modem (which does not have to be a Draytek) and if it is not mission critical, I'd sell the other 2820 and 2930 (or take one home so I can VPN into work with a LAN<>LAN connection). If the 2820 is mission critical, I'd keep the other one as a back up and sell the 2930. Alternatively you could ditch both 2820's and keep the 2930 and get 2 ADSL modems. I'm not sure I'd like this unless the ADSL modems can have different LAN IP's for their ethernet connection.

2900Gi/v2.5.6; 2900/v2.5.6

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami