DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

QoS status view.

  • spudster
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 Sep 2009 11:11 #57629 by spudster
QoS status view. was created by spudster
I have Qos enabled.

As a quick and basic overview of my setup.

High Priority
2x Xbox IPs All Traffic/Protocols
BBC iPlayer
ALL RDP
ALL DNS

Middle Priority
HTTP
HTTPS
FTP
SMTP
POP3
IMAP

Low Priority
P2P

When I'm downloading a basic file via http from ati.com. The draytek status shows it as outbound traffic? Any Ideas?


Please Log in or Create an account to join the conversation.

More
08 Sep 2009 17:00 #57632 by telagente
Replied by telagente on topic QoS status view.
Hi,
QOS traffic doesn't show inbound for my wireless connected devices, only on wired ports. Is that how you are configured ?
Regards

Please Log in or Create an account to join the conversation.

  • spudster
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 Sep 2009 17:25 #57633 by spudster
Replied by spudster on topic QoS status view.
It is a wireless laptop, but that doesn't explain why the draytek is counting the http download traffic as outbound!?

Please Log in or Create an account to join the conversation.

More
09 Sep 2009 11:27 #57644 by telagente
Replied by telagente on topic QoS status view.
True, but if you plug into a router port and run the download again you should also see the inbound QOS traffic rate, which may give you a clue as to what you are seeing on the outbound. Just a thought.

Please Log in or Create an account to join the conversation.

More
30 Sep 2009 15:53 #58004 by blazedras
Replied by blazedras on topic QoS status view.
what page do u find this and which router? I'm on a 2710n and can't seem to find a similar QoS settings page :(

Petros Constantopoulos

Please Log in or Create an account to join the conversation.

  • spudster
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
30 Sep 2009 16:24 #58005 by spudster
Replied by spudster on topic QoS status view.
vigor 2820n

qos was under bandwidth management



To update everyone.

Hello Simon,

This is a known issue with wireless clients, our RD is trying to solve it. Currently,
the QOS is only works for outbound now, if we enable the inbound direction,
the performance will be very terrible, we may need more time to solve this problem.

Regards,

Andrew

http://www.support.draytek.co.uk


Please Log in or Create an account to join the conversation.

Moderators: ChrisSami