DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Dial plans not working after upgrading to 3.2.3 firmware

More
07 Sep 2009 15:20 #57617 by bdl99
Dial plans not working after upgrading to 3.2.3 firmware on 2930Vn

I was previously on 3.2.1 and I had three simple dialplans that all worked. As an example I had a dialplan entry that added the area code for local numbers which were 7 digits long.
Mode: Add
Min Len: 7
Max Len: 7
OP Number: 1609

I tried disabling and re-enabling and rebooting but still not working.

Anyone else seen this or have any ideas?

Please Log in or Create an account to join the conversation.

More
07 Sep 2009 21:54 #57623 by bdl99
I restored version 3.2.1 and everything is working again.

I tried 3.2.2 and had the same problem as I had with 3.2.3 so whatever the problem is it was introduced in V3.2.2 and still present in V3.2.3

Please Log in or Create an account to join the conversation.

More
09 Sep 2009 11:39 #57645 by plandregan
The output should be 01609 and are the local number part not 6 digits.

Ex dial 123456 the actual number sent to line would be 01609 123456 or better still SIP providers prefer you to use international. So ADD 00441609 then it will dial 00441609 123456

Please Log in or Create an account to join the conversation.

More
09 Sep 2009 14:13 #57646 by bdl99
I'm actually using the unit in the US so 1609 is correct there is no leading zero. Basically it was working as I would expect under version 3.2.1 of the firmware but with 3.2.2 or 3.2.3 it no longer works.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami